Used Broadcom BCM957414M4143C Single-Port 50 Gb/s QSFP28 Ethernet PCI Express 3.0 x8 OCP 2.0 Mezzanine Card

100% Health

Detail overview

BROADCOM BCM957414M4143C Single-port 50 Gb/s Qsfp28 Ethernet Pci Express 3.0 X8 Ocp 2.0 Mezzanine Card Rohs-compliant.

Overview The BROADCOM BCM957414M4143C Is A Single-port 50 Gb/s, Pci Express 3.0 X8 Mezzanine Card, Designed To The Open Compute Project (ocp) Mezzanine Card 2.0 Design Specification With A Qsfp28 Network Connector As A Type 1 Adapter With The Board Outline Adhering To The Original V0.5 Dimensions. The Adapter Supports Both Qsfp28 Optical Modules And Copper Direct-attach Cables. The Card Uses The BROADCOM Bcm57414 50gbe Mac Controller With An Integrated Single-channel 50gbe Sfi Transceiver.

Features

• Single-port Pluggable Media Interface, Which May Be Equipped With 50 Gb/s Qsfp28 Optical Transceiver Or With Copper Direct-attach Cable
• Fully Compliant With The Sff-8665 Standard
• X8 Pci Express 3.0 Compliant
• Sr-iov With Up To 128 Virtual Functions (vfs)
• Function-level Reset (flr) Support
• Truflow™ Flow Processing Engine
• Virtual Network Termination—vxlan, Nvgre, Geneve, Gre Encap/decap
• Vswitch Acceleration
• Tunnel-aware Stateless Offloads
• Dcb Support: Pfc, Ets, Qcn, Dcbx
• Rdma Over Converged Ethernet (roce)
• Network Controller Sideband Interface (nc-si)
• Smbus 2.0
• Mctp Over Smbus
• Pcie-based Uart And Kcs
• Jumbo Frames Up To 9 Kb
• Advanced Congestion Avoidance
• Multiqueue, Netqueue, And Vmq
• Ipv4 And Ipv6 Offloads
• Tcp, Udp, And Ip Checksum Offloads
• Large Send Offload (lso)
• Large Receive Offload (lro)
• Tcp Segmentation Offload (tso)
• Receive-side Scaling (rss)
• Transmit-side Scaling (tss)
• Vlan Insertion/removal
• Interrupt Coalescing
• Network Boot—pxe, Uefi
• Iscsi Boot
• Wake-on-lan (wol)
• Msi And Msi.x
• Conforms To The Ocp Mezzanine Card 2.0 Design Specification Type 1 Vertical Stack

SHIPPING and HANDLING in 1 business day

1.     Buyer may return defective Goods for replacement or refund (as elected by Seller) within 30 days of purchase.

2.     Subject to Seller's reasonable approval, Buyer may return for credit within 30 days of purchase non-defective 

3.     Non-defective, special order products are normally not accepted for return; other returns are handled on a case-by-case basis in Seller's sole discretion.

4.     All returns must be accompanied by an authorized RMA number, which is valid for 15 days after the date of issuance, and returns of non-defective normally stocked 

5.     items in resalable condition will be accepted for credit subject to a restocking charge of no less than 20% of the sales price.

6.     A Return Material Authorization (RMA) number must be obtained for all returns and buyer pays for return shipping. 

7.      International buyers are responsible for return freight charges.