Used Broadcom BCM957416N4160C Dual-Port 10GBASE-T Ethernet PCI Express 3.0 Net Card

100% Health

Detail overview

BROADCOM BCM957416N4160C Dual-port 10gbase-t Ethernet Pci Express 3.0 X8 Ocp 3.0 Small-form-factor Card.

Overview The BROADCOM® BCM957416N4160C Is A Dual-port 10 Gb/s Pci Express 3.0 X8 Network Adapter Card Designed To The Open Compute Project (ocp) 3.0 Design Specification In Small Form Factor With Two 10gbase-t Network Connectors. The Adapter Supports 10gbase-t And 1000base-t Ethernet On Category 6, 6a, Or 7 Twisted-pair Cables. The 1000base-t Can Operate On Standard
category 5e Utp. The Card Uses The BROADCOM Bcm57416 10gbase-t Controller.

Features
• Dual Port 10 Gb/s 10gbase-t Interface:
- 10gbase-t Ieee 802.3an.
- 1000base-t Ieee 802.3ab.
- Eee On 10gbase-t And 1000base-t.
- Auto Sense Mode.
- Detection And Correction Of Pair Swaps (mdi Crossover), Pair Skew, And Pair Polarity.
- Auto-negotiation With Next Page Support.
- Ieee Fast Retrain And Link Monitoring.
• X8 Pci Express 3.0 Compliant.
• Sr-iov With Up To 128 Virtual Functions (vfs).
• Function-level Reset (flr) Support.
• Truflow™ Flow Processing Engine.
• Virtual Network Termination—xvxlan, Nvgre, Geneve, Gre Encap/decap.
• Vswitch Acceleration.
• Tunnel-aware Stateless Offloads.
• Dcb Support – Pfc, Ets, Qcn, Dcbx.
• Rdma Over Converged Ethernet (roce)
• Network Controller Sideband Interface (nc-si).
• Smbus 2.0.
• Mctp Over Smbus.
• Pcie-based Uart And Kcs.
• Jumbo Frames Up To 9 Kb.
• Advanced Congestion Avoidance.
• Multiqueue, Netqueue, And Vmq.
• Ipv4 And Ipv6 Offloads.
• Tcp, Udp, And Ip Checksum Offloads.
• Large Send Offload (lso).
• Large Receive Offload (lro).
• Tcp Segmentation Offload (tso).
• Receive-side Scaling (rss).
• Transmit-side Scaling (tss).
• Vlan Insertion/removal.
• Interrupt Coalescing.
• Network Boot—pxe, Uefi.
• Iscsi Boot.
• Wake-on-lan (wol).
• Msi And Msi-x.
• Conforms To The Ocp 3.0 Design Specification Version 1.00.